Home | Customer Service | Our Services | Discover Tecniwork Premium
Prices on Tecniwork.it are visible after logging into the website reserved to professionals only.
Tecniwork Air Power Plus micromotor with brushless suction, practical and efficient, with adjustable speed from 4,000 to 30,000 rpm. Handpiece with coaxial suction, light and handy, with start/stop switch and automatic pressure clamp for bur change. Up to 3 speed/suction memories can be set. Suction system with internal charcoal filter for increased guarantee of clean air re-entry into the working environment.
Handpiece overload protection: the motor stops for approximately 5 seconds if subjected to excessive overload; the electronic overload protection interrupts the current flow and both the micromotor and the suction turbine stop.
Suction turbine temperature protection fuse: if the air temperature in the suction turbine exceeds 70°C, the turbine and handpiece switch off and the overheating symbol appears on the display.
Functional features:
Suction with brushless motor
Suction power adjustment
Start/stop switch on handpiece
Handpiece with automatic clamp
Possibility of storing 3 speeds and 3 suction intensities
Reversal of cutter rotation direction
Digital display with information on operation and maintenance
Soft-Touch controls
Variable speed pedal (optional)
Start/stop pedal (optional)
Technical characteristics:
Adjustable speed from 4,000 to 30,000 rpm
Power supply voltage: 100 - 230V / 50 Hz - 60 Hz
Max. power consumption: 120 Watts
Dimensions:
Unit dimensions: W 25 x H 12.8 x D 29 cm
Handpiece dimensions: Length 14.2 cm
Handpiece diameter: 1.7 - 2.4 - 2.8 cm
Handpiece weight: 100 g
Central unit weight: approx. 2.8 kg
Standard accessories:
Handpiece holder 1 pc
Clamp cleaning tool 1 pc
Optional:
Ref.AF950P Variable speed pedal
Ref.AF952P Start/stop pedal
Ref.AF952S Disposable micro-filtering TNT bag 1 pc
Ref.AF952SC Disposable paper bag 1 pc
Only use cutters with a shaft diameter of 2.35 mm and length of min. 35 mm
Never use cutters that are non-concentric, out of alignment or damaged.
It is recommended to use cutters with a maximum head diameter of Ø 10 mm and a minimum shaft length of 35 mm.
If you leave the page all the data will be lost
You have to confirm your Privacy Policy consents and information to sign up for our Newsletter.
Thank you for signing up for our Newsletter